Project Spotlight: Septic System Excavation & Riser Installation Project in Redmond, WA

Our team recently completed a septic system excavation and inspection project for a homeowner in Redmond, WA after concerns about root intrusion inside the septic tank. The goal was to expose the tank, inspect its condition, eliminate the source of the root intrusion, and make future maintenance much easier.

After arriving on site, we excavated the first compartment lid, second compartment lid, and crossover baffle to gain full access to the septic tank. Once the second compartment was opened, we discovered significant root intrusion entering through the second compartment lid and the crossover baffle lid. To ensure the problem hadn’t caused additional damage, we excavated the entire top of the tank and performed a thorough structural inspection.

The inspection confirmed that the septic tank itself was in good condition. We found no cracks, holes, broken sections, or gaps in the concrete tank or transport line. A small amount of roots was present near the outlet baffle, but further inspection showed the roots were entering only through the crossover baffle lid and second compartment lid, not through the tank structure itself.

With the source identified, our technicians removed all of the root intrusion and upgraded the system by installing a new 12-inch riser over the crossover baffle along with new 24-inch risers on both the first and second compartment lids. These risers create a tighter seal against future root intrusion while providing easy access for routine inspections and septic pumping without the need for repeated excavation.

By the end of the project, the septic tank had been fully inspected, all intrusive roots had been removed, and the new risers were securely installed. The homeowner now has a properly sealed, more accessible septic system that will be easier to maintain and better protected against future root-related issues. Routine inspections and prompt attention to root intrusion can help extend the life of a septic system while preventing more expensive repairs down the road.

Project Gallery

Other Services We Offer in Redmond:
Our Recent Projects
Redmond
Redmond·Septic Tank Riser Installation

Septic System Excavation & Riser Installation Project in Redmond, WA

Our team recently completed a septic system excavation and inspection project for a homeowner in Redmond, WA after concerns about root intrusion inside the septic tank. The goal was to expose the tank, inspect its condition, eliminate the source of the root intrusion, and make future maintenance much easier. After arriving on site, we excavated […]

Woodinville
Woodinville·Septic Tank Riser Installation

Woodinville Septic Tank Riser Installation

A Woodinville riser installation and reseal. Two 24-inch risers and one 12-inch riser resealed to the tank, the transport line excavated and its connection resealed, and a new 12-inch riser fitted over the LCB, all backfilled at the end.

Redmond
Redmond·Emergency Septic Services

Redmond Emergency Septic Services

A Redmond homeowner with recurring backups, gurgling fixtures and sewage odors. The two-compartment tank was flooded, the outlet baffle filter was clogged, and the outlet baffle transport line has settled severely, which is what keeps flooding the tank. Both tanks pumped and the filter cleaned; the transport line still needs addressing.

Spanaway
Spanaway·Septic Tank Riser Installation

Spanaway Septic Tank Riser Installation

One 12-inch and two 24-inch risers fitted to give proper access to the tank. The old concrete around the pump tank riser was cut out, the area cleaned and resealed, and every inside rim sealed with hydraulic cement to keep groundwater and roots out.

Read More:
How Long Does It Take to Pump a Septic Tank?
How Long Does It Take to Pump a Septic Tank?

Most residential septic pumping appointments take roughly 30 minutes to two hours, but the actual time depends on the tank size, how easy the tank is to reach, its condition, and how much has built up inside it.

Is Charmin Toilet Paper Septic Safe?
Is Charmin Toilet Paper Septic Safe?

Many Charmin products break down with water and suit a well-maintained septic system, but the product, the amount used and the condition of your tank all matter. What to look for, why flushable wipes are a different question, and when the paper is not the real problem.

Records Show 1 in 10 King County Food Vendors Had a Plumbing or Sewage Violation Since 2024
Records Show 1 in 10 King County Food Vendors Had a Plumbing or Sewage Violation Since 2024

King County Public Health inspected food businesses 71,580 times between January 2024 and September 2026, and closed 27 of them. For restaurant plumbing the real risk is not the citation - it is the backup that stops service, and the closure that follows.

What Is a Sump Pump Used For?
What Is a Sump Pump Used For?

What Is a Sump Pump Used For? A Practical Guide for Washington Homeowners What is a sump pump used for? It removes excess water collecting beneath or around the lowest part of a home before that water spreads across a basement floor or soaks a crawl space. In homes dealing with heavy rain, saturated soil, […]

Tacoma Grease Trap and FOG Compliance Laws
Tacoma Grease Trap and FOG Compliance Laws

Tacoma Grease Trap and FOG Compliance Laws: How Restaurant Owners Can Stay Compliant Running a restaurant in Tacoma means managing more than great food and customer service. Food service establishments must also comply with local Fats, Oils, and Grease (FOG) regulations designed to protect the city’s wastewater system. Failing to maintain your grease interceptor can […]

Contact us


(253) 364-7416
BOOK AN APPOINTMENT
Call (253) 364-7416