Project Spotlight: Spanaway Septic Inspection

Upfront Septic provided a residential septic system inspection for a homeowner in Spanaway, WA. Upon arrival, our technician located the two-compartment septic tank in the backyard. The system is equipped with risers, providing access to the tank for inspection and future maintenance.

During the inspection, we identified gaps where the risers meet the septic tank. A gap was visible at the inlet riser connection, and similar gaps were found around the other risers. These openings should be resealed to help prevent groundwater, debris, and other unwanted materials from entering the septic system.

Root intrusion was also observed around the risers serving both the first and second compartments. Based on the condition of the connections, Upfront Septic recommends resealing all of the risers to improve the integrity of the tank and help prevent additional root intrusion.

The septic tank did not appear to require pumping at the time of the inspection. Before leaving the property, our technician asked the homeowner to flush a toilet to verify system flow. The flush came through strongly, providing a positive indication of the system's current flow performance.

The inspection was completed without pumping, with riser resealing recommended as the primary maintenance item identified during the visit.

Project Gallery

Find Septic Inspections Near Me:
Our Recent Projects
Spanaway
Spanaway·Septic Inspections

Spanaway Septic Inspection

A Spanaway inspection that turned up gaps where the risers meet the tank, at the inlet connection and around the others, with root intrusion at both compartments. The tank did not need pumping, and a toilet flushed before we left came through strongly. Resealing all the risers is the recommendation.

Spanaway
Spanaway·Septic Tank Riser Installation

Spanaway Septic Tank Riser Installation

One 12-inch and two 24-inch risers fitted to give proper access to the tank. The old concrete around the pump tank riser was cut out, the area cleaned and resealed, and every inside rim sealed with hydraulic cement to keep groundwater and roots out.

Tacoma
Tacoma·Septic Inspections

Tacoma Septic Tank Pumping and Inspection

A Tacoma tank that had gone a long time without being pumped. The customer had opened the first compartment; we excavated the second to reach the whole tank, crust busted through a heavy build-up of solids, and pumped approximately 1,125 gallons — a job that took considerably longer than usual because of the condition inside.

University Place
University Place·Septic Inspections

University Place Septic Inspection and Pumping

A two-compartment tank in University Place with risers on every access point but the outlet. The transport line at the outlet was completely submerged, pointing at a drainfield beginning to struggle, and root intrusion was found where the risers meet the tank. We pumped approximately 1,125 gallons and stress tested the system.

Gig Harbor
Gig Harbor·Septic Inspections

Gig Harbor Septic Inspection and Repair

A high-level alarm at a Gig Harbor property with the pump tank flooded. We pumped the pump tank and about 1,125 gallons from the septic tank, and the inspection found a pump that would not activate, an unsealed junction box, root intrusion and lid damage.

Gig Harbor
Gig Harbor·Septic Inspections

Septic Pumping and Inspection in Gig Harbor

Upfront Septic recently completed a septic system inspection and maintenance service for a homeowner in Gig Harbor, WA. The project included a comprehensive inspection of the on-site sewage system to evaluate the condition and performance of the entire system, helping ensure it was operating safely and efficiently. As part of the visit, our technicians pumped […]

Maple Valley
Maple Valley·Septic Inspections

Septic Inspection in Maple Valley

A homeowner in Maple Valley recently scheduled a comprehensive septic system inspection as part of the process of selling their home. Septic inspections are an important step during a real estate transaction, giving buyers confidence that the onsite wastewater system is functioning properly and helping sellers address any concerns before closing. Our technicians located the […]

Kent
Kent·Septic Inspections

Septic System Inspection, Pumping & Excavation Project in Kent, WA

Our team recently completed a septic system inspection and excavation project for a homeowner in Kent, WA. The property had multiple buried access lids that required careful excavation to fully inspect the system and determine its overall condition. After locating and uncovering the septic tank and access points, we pumped the tank to remove accumulated […]

Read More:
How Long Does It Take to Pump a Septic Tank?
How Long Does It Take to Pump a Septic Tank?

Most residential septic pumping appointments take roughly 30 minutes to two hours, but the actual time depends on the tank size, how easy the tank is to reach, its condition, and how much has built up inside it.

Is Charmin Toilet Paper Septic Safe?
Is Charmin Toilet Paper Septic Safe?

Many Charmin products break down with water and suit a well-maintained septic system, but the product, the amount used and the condition of your tank all matter. What to look for, why flushable wipes are a different question, and when the paper is not the real problem.

Records Show 1 in 10 King County Food Vendors Had a Plumbing or Sewage Violation Since 2024
Records Show 1 in 10 King County Food Vendors Had a Plumbing or Sewage Violation Since 2024

King County Public Health inspected food businesses 71,580 times between January 2024 and September 2026, and closed 27 of them. For restaurant plumbing the real risk is not the citation - it is the backup that stops service, and the closure that follows.

What Is a Sump Pump Used For?
What Is a Sump Pump Used For?

What Is a Sump Pump Used For? A Practical Guide for Washington Homeowners What is a sump pump used for? It removes excess water collecting beneath or around the lowest part of a home before that water spreads across a basement floor or soaks a crawl space. In homes dealing with heavy rain, saturated soil, […]

Tacoma Grease Trap and FOG Compliance Laws
Tacoma Grease Trap and FOG Compliance Laws

Tacoma Grease Trap and FOG Compliance Laws: How Restaurant Owners Can Stay Compliant Running a restaurant in Tacoma means managing more than great food and customer service. Food service establishments must also comply with local Fats, Oils, and Grease (FOG) regulations designed to protect the city’s wastewater system. Failing to maintain your grease interceptor can […]

Contact us


(253) 364-7416
BOOK AN APPOINTMENT
Call (253) 364-7416